| Controller | Smart-PAK
PLUS 8 inputs / 6 outputs |
Smart-PAK
PLUS 16 inputs / 12 outputs |
| Power Requirements |
24 VDC |
|
| Current Requirements | .25 amp max @ 24 VDC (8/6) | .5 amp max @ 24 VDC (16/12) |
| Digital Inputs |
8 |
16 |
| Digital Input Voltage |
24 VDC sink |
|
| Digital Outputs |
6 |
12 |
| Digital Output Type |
Form A relay |
|
| Digital Output Rating |
7 amps / output |
|
| Digital Output Voltage |
up to 250 VAC or 30 VDC |
|
| Program Capacity | 4K | |
| Memory Type | EPROM / Battery Backed RAM | |
| Serial Port 1 | RS232 Full Duplex | |
| Serial Port 2 | 2-wire RS485 | |
| High Speed Counter | 1 @ 10 KHz | |
| Scan Rate | 15ms / K ladder logic instruction | |
| Timers / Counters | up to 250 | |
| Internal Relays | 149 | |
| Communication Protocols | ASCII, MODBUS RTU | |
| Networking | MODBUS RTU up to 16 slaves | |
| Dimensions | Single
board 5.00" x 7.00" x 2.00" |
Double
board 5.00" x 7.00" x 3.00" |
| Operating Temperature | 0
- 60C (32 - 140F) 90% relative humidity non-condensating All components used are rated for at least 0 - 70C (32 - 158F) |
|
| Options | |
| Analog Inputs | up to 8 @ 0-5, 0-10, +/- 5, +/- 10 VDC, 0-20 mA |
| Analog Outputs | up to 4 @ 0-5, 0-10, +/- 5 VDC up to 2 outputs @ 0-20 mA |
| Analog Resolution | 12 Bit (0-4095) |
| Thermocouple Inputs | up
to 4 Type K +/- 3 C accuracy *******Ungrounded / Isolated type ONLY******* |
| RTD Inputs | up
to 4 @ 100 ohm din (0.0392) +/- 1 C accuracy *******Ungrounded / Isolated type ONLY******* |
| Expanded Memory | up to 12K |
| 2nd High Speed Counter | 2 HSC @ 5 KHz |
| Bi-Directional HSC | Bi-Directional HSC with Interrupt @ 5 KHz |
| * Other options available, contact Sales for more information at 219-462-2800, ext. 204 | |